Corsair F-31 For Sale

Description

A rare F-31 RS with 2015 “Corsair standard” rotating aluminum wing mast. Set up for lightest possible weight for best performance, but still has cruiser oriented options such as removable galley module , autopilot etc. New bottom antifouling paint. Recent extensive trailer reconditioning.
Delivery possible to locations on USA East coast.

Manufacturer’s Description
The F-31 aft cockpit model features an interior configuration that easily converts from day to night requirements. Six-foot, two-inch standing headroom, a large double V-berth forward, and a removable galley module with sink and stove. Large storage compartments in each float augment the plentiful stowage in the cabins. The cockpit can seat four to six adults, though this is seldom necessary as the broad decks and nets give the crew many other comfortable places to spread out and relax. The forward hull shape effectively deflects spray away from the cockpit, and winches, halyards and sheets, and the controls for the daggerboard, rudder, and outboard motor can all be operated from the cockpit. The fractional rotating rig is very efficient and easy to handle. The fully battened mainsail has a roller furler boom. An asymmetrical spinnaker flown from the foldable aluminum bowsprit enhances off-wind performance. A daggerboard provides efficient windward performance; this, along with the kickup rudder, enables the F-31 to moor in very shallow water or even be beached.
Background information

custom ordered in 1997 for original owner in California with lightweight and simplicity in mind to race
No mouse fur interior liner; painted instead with white epoxy paint
Halyard rope clutches are mounted on the mast clutches to remove compression loads on deck
Head (bathroom) curtain for privacy vs fiberglass sink/wall combo
Porta-loo vs installed Jabsco and holding tank
Lightweight galley box and campstove vs.fiberglass stovetop and sink combo
Matching cushions for V-berth and main salon in very good condition
Sunrise trampolines in good condition (one small sewn repair on starboard main net)
Hollow bunk boards to convert salon to queen bed vs. factory sliding version (heavy)
2019 new acrylic tinted windows and hatch boards (with vent)
Leneman- style “push pit” (aft stainless arch)
Stainless steel cockpit rails
New bottom antifouling paint 2022–Petit Vivid White: 2 epoxy barrier coats and 2 top coats on sanded and prepped surface (includes amas so boat can remain protected if folded in the water

Sails

Main sail (Hydranet?) triradial square top in good condition
Jib, roller furling, triradial Kevlar laminate, in good condition with UV protective strip
Fully battened hank-on jib included with original wire forestay

Mast head Code zero with Facnor continuous line furler, both in very good condition
Mast head Screacher on standard Harken drum furler in very good condition

Standing Rigging

aluminum rotating wing mast, single spreader with 1×19 wire diamond wires; new in 2015
Colligo CN5 structural jib furler (ELHF system) with anti-torsion forestay (late 2019)
Colligo double Cheeky tangs with dynex dux cap shrouds and forestay loop (2018)
Laser cut, electropolished chain plates, 316 ss (2018)
Mast head Dyneema 6:1 running backstays (to support top of mast when using masthead Code Zero
Mast raising wires (baby stays/shrouds) with 1×19 wire, and new pelican hooks (2022)
Dyneema whisker stays for bowsprit (2018)
custom anodized aluminum 6.5’ bowsprit with 2:1 Dyneema bobstay (2018)
Main hull to ama forward underwing stabilizing wires replaced in 2020 (1×19 wire with new turnbuckles and shackles
Port side cable has anchor roller integrated (2019)
Dyneema trampoline lacing (2019)

Running Rigging

Lewmar heavy duty 60mm block, inverted V mainsheet system (no traveler, open cockpit) with new New England 10mm Salsa line mainsheet
Barber hauler for jib sheets
Port and starboard mainsail barber haulers
Mast head spinnaker halyard, 10mm Globe, Dyneema cored (mast raising halyard) (2018)

Dedicated Code Zero and Screacher sheets
Spectra webbing with blocks for Code Zero and screacher sheets

Electical System and Electronics

1 house battery (2018 group 31)
1 new engine starter battery

battery switch and circuit breaker panel
Victron battery load and charge balancer
110v automatic dual battery charger for when boat is being stored
12 volt USB charger
Raymarine Evo autopilot (2019) with wireless remote control
VHF radio,Standard Horizon Eclipse
Ritchie back llit compass (2017)
Handheld wind meter
Interior LED lighting in main cabin
LED anchor light (hardwired, hoistable vs wired and mounted in mast)
Bow and stern navigationlights
2 cabin fans
Victron battery load and charge balancer
110V automatic dual battery charger for when boat is being stored
12 volt USB charger

Miscellaneous

12 ft Porta-bote folding dingy, stored same place trailer or sail with motor, 3 seats, 2 oars
Aluminum sturdy gin pole with 3⁄4” tapered, stainless pins
Heavy duty aluminum pivot brackets for mast raising (vs undersized bimini brackets)
Custom designed aluminum “L back saver” articulating roller bracket that utilizes the 3⁄4” pin to pick the mast up and out of the forward pulpit mast bracket to allow rolling mast aft for stepping without manually lifting or carrying the forward end of the mast. Bracket also takes load off of the bow pulpit while trailering. One must transfer the 3⁄4” pin from the “L back saver” to the gin pole to then raise the mast
2500lb braking winch for stepping mast and hauling boat on trailer, with 10mm kevlar 10mm line (2021)
Custom SeaDeck foam flooring in main cabin
17lb Mantus anchor (incredible holding 2019) 15’ of 5/16” chain and 150’ of 3 strand anchor rode and bridle
15lb Delta secondary anchor with about 80’ of 3 strand for Bahamian moor, stern or dinghy anchor
Texaline mesh cockpit line bags (8 total)
Shelf with 4 gallon fresh water tank and gravity tap in galley area
Stern-mounted Magma propane grill

2.5 gallon fresh water pressure washdown
4 flat fenders
4 dock lines
4 universal fit cockpit drink holders
Insect netting for forward hatch and main companionway
Under-cockpit storag: lightweight lattice shelf dividing space into 2 useable compartments for code zero storage, etc

Motors
Motor 1

2019 Yamaha 9.9HP, 4 stroke, high thrust prop, power tilt, electric start
custom anodized aluminum motor bracket with 6 attachment points (vs 4) to distribute the loads of a higher horsepower motor
2 x 3 gallon fuel tanks port and starboard under seats with quick connect hose fittings

Motor 2

2018 Tohatsu 3.5 h.p. 4 stroke for tender
2 x 1 gallon fuel tanks fit under cockpit seat

Trailer

Double axle road trailer, Galvanized steel, rebuilt in 2016 with stainless steel bunk brackets, stainless steel suspension brackets and bolts, new bunk boards and carpet, new hitch coupler, new 2500lb braking winch for mast raising and pulling the boat onto trailer. Road ready.
All 5 tires replaced 2022
New disc brake rotors, calipers, and pads 2022
New springs and shackles 2022

Disclaimer
Windcraft Multihulls offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Show More…